Affiliate disclosure: we may earn a commission if you buy through links on this page, at no extra cost to you.

Guide

Gate opener size guide

Every gate opener is rated for a maximum gate length and weight. Get those two numbers right and the choice is easy.

Size your gate in three steps

  1. Measure the length of the gate itself, end to end – not the opening.
  2. Find the weight. Your gate's installer or fabricator can usually tell you; for a double swing gate, size each leaf.
  3. Choose an opener rated above both – and leave some headroom, since a gate that's near the limit works the motor hard.

Then think about traffic. A home gate opens a few times a day; an apartment complex or business entrance may open hundreds of times. The commercial and APT models are built for that.

Not sure whether you need slide or swing? Start with slide vs swing gate openers.

Every opener's maximum gate size

Single-motor models from Gate Operators Direct, smallest to largest. Prices as listed on the store.

TypeOpenerMax lengthMax weightMotorPriceBuilt for
SlideEagle-118 ft300 lb½ HP$1,349Homes
SlideEagle-1000 FSC27 ft600 lb½ HP$1,649Homes, light commercial
SlideEagle-1000 FR27 ft600 lb½ HP$1,799Homes, light commercial
SlideEagle-2000 FR45 ft1,000 lb½ HP$1,999Commercial
SlideEagle-2000 FSC45 ft1,000 lb½ HP$2,000Commercial
SlideEagle-2000-FR 1 HP45 ft2,000 lb1 HP$2,395Commercial, heavy traffic
SlideEagle 2000 APT 1 HP50 ft2,500 lb1 HP$2,499Apartments, gated communities
SlideEagle 2000 APT 2 HP50 ft3,500 lb2 HP$3,499Industrial
SwingEagle II14 ft400 lb½ HP$1,849Homes
SwingEagle-10018 ft600 lb½ HP$2,299Homes, light commercial
SwingEagle 200 1 HP24 ft1,000 lb1 HP$2,795Commercial, industrial

Double gates need a dual opener such as the Eagle 200 DM (swing) or Eagle 2000 APT DM (slide) – check the product page for capacity per leaf.